Skip to content
All services
Planned visit

AC Installation & System Replacement

Sized by real load calculation — not by whatever happened to be there before.

From $5,400 installedOne day on sitecity permit included
New air conditioning condenser installed beside a home

What's actually involved

The single most common mistake in residential HVAC is replacing a system with whatever tonnage was there before. If the original was oversized — and in Dallas a great many were — you inherit short cycling, poor humidity control and a house that feels clammy at 72°.

We run a Manual J load calculation on every replacement. It accounts for your actual square footage, insulation, window orientation and duct condition, and it is the difference between a system that merely cools and one that is genuinely comfortable.

Manual J load calculation

Room-by-room heat gain calculated properly, so the equipment matches the house.

Duct and airflow assessment

New equipment on undersized ducts underperforms. We measure before we quote.

City permit and inspection

Dallas and surrounding cities require a mechanical permit. We pull it and schedule the inspection.

Full changeout, not a partial

Line set flush or replacement, new pad, new disconnect, condensate safety switch and thermostat.

Commissioning and documentation

Charge weighed in to manufacturer spec, static pressure verified, readings recorded and left with you.

Warranty registered in your name

10-year parts warranty filed with the manufacturer, plus our 10-year labour guarantee.

How the job runs

  1. 01

    In-home assessment and quote

    Load calculation, duct inspection and honest repair-versus-replace numbers. Free, and with no pressure to decide on the spot.

  2. 02

    Equipment selection

    Two or three genuine options at different efficiency levels, with the running-cost difference shown in dollars.

  3. 03

    Permit and scheduling

    We file the mechanical permit and book a date that suits you — usually within the same week.

  4. 04

    Installation day

    Typically seven to nine hours. Floor protection down, old equipment hauled away, new system commissioned and explained before we leave.

Spread it over 36 months

On a job starting around $5,400

$150per month

Indicative only — the figure above is simply the price divided by the term. Financing is arranged through a third-party lender, and the rate, fees and approval are theirs, not ours. Ask us on +1 (214) 555-0147 and we'll send the current options in writing before you decide.

Questions we get every week

A standard single-system changeout is a one-day job, usually seven to nine hours from arrival to commissioning. The city inspection follows within a few business days and needs no work from you.

Something not covered here? Call +1 (214) 555-0147 and talk to a licensed HVAC technician directly.

People who needed this also asked about

Ready to book ac installation?

Flat-rate quote in writing before any work starts. TACLA #00123456C · EPA 608 Universal.